Medical care robots being made with 3D origami in B.C. lab

The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)The humanoid sensing robot has a 3D printed finger cap that measures oxygen levels. (Dr. Woo Soo Kim)
This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)This robotic arm, built in SFU’s Surrey campus, can measure heart rate, breathing, temperature and muscle movements. (Dr. Woo Soo Kim)

A B.C. professor would like to see a robot take your vitals when you visit a doctor in the somewhat near future.

Dr. Woo Soo Kim, associate professor of mechatronic systems engineering at Simon Fraser University, has developed health care robots that can measure heart rate, respiration rate, temperature and oxygen levels. The oxygen level measurement in particular could be used to monitor severe COVID-19 patients.

He hopes the sensor robots can support doctors and nurses, and is currently using two prototypes to collaborate with a team of Vancouver Coastal Health researchers on how a technology like this could be applied in practice.

There’s a lot to be worked out — including how comfortable will patients be receiving care from a robot – but Kim hopes to have sensing robots in health care in five to 10 years. He imagines a full complement of medical care robots, including passive bots that take vitals, companion bots that would hang out with patients to regularly monitor vitals so people don’t need to wear an uncomfortable device, and even receptionist bots.

We might already be warming up to machine-based medical care, as a recent report indicated most British Columbians now prefer virtual meetings with their doctors for routine check ups.

READ MORE: Majority of British Columbians now prefer routine virtual doctor’s visits: study

His lab, Additive Manufacturing in SFU’s Surrey campus, has been working on advanced 3D printing, wearable technology and sensing robots since he arrived in 2010, and narrowed their focus health care uses in 2018. He works with six to seven students and interns.

Now they have two working prototypes to take to doctors and nurses. One is an arm, completely made in the lab with 3D printed origami. The second machine is a shiny, white humanoid that Kim’s lab has added on their own hand with highly specialized electron sensors.

The origami design was chosen not just because it’s cool. His lab has spent years testing various architectural solids with 3D printing, and found that “3D origami structures have naturally less fatigue characteristics with re-configurable structures. So, it’s good if they are used for bending structures such as our fingers,” Kim said.

Funding has been partially provided by the Natural Sciences and Engineering Research Council of Canada, and the lab is applying for more grants to expand development.

The first stage of robotic health care is passive, with the machines gathering information and sharing results with human health care professionals, but Kim envisions future machines that could be more involved.

Do you have something to add to this story or something else we should report on? Email: zoe.ducklow@blackpress.ca


BC HealthScience

Just Posted

Grand Forks Fire/Rescue volunteers doused a hillside fire late Monday night, May 17. Photo: Laurie Tritschler
Grand Forks Fire/Rescue puts out hillside fire

No one was injured after a campfire got out of control below Columbia Drive

Michelle Jacobs receives her first dose of the COVID-19 vaccine at the Coast Capri Hotel on April 28, 2021. The pop-up clinic was hosted by the First Nations Health Authority. (Aaron Hemens/Capital News)
126 new cases of COVID-19 in Interior Health over the weekend

There are 22 individuals hospitalized due to the virus, and 13 in intensive care

View of the red SUV down an embankment. Photo: Trail RCMP
High speed crash sends 4 people to Trail hospital

The collision happened May 14 at the intersection of Highway 3B and Devito Drive

Lauren Regula
Trail native comes back for a third Olympic Games

Trail native Lauren Regula is proud to represent her country in softball at Tokyo Olympic Games

X
Trail RCMP issue BOLO for Solo

Solo was last spotted in Warfield, but has also been seen around the Tadanac area.

An avalanche near Highway 1 in Glacier National Park. Avalanche Canada will benefit from a $10 million grant from the B.C. government. (Photo by Parks Canada)
Avalanche Canada receives $10-million grant from B.C. government

Long sought-after funds to bolster organization’s important work

The top photo is of a real carbine rifle, while the bottom photo is the airsoft rifle seized from a Kelowna man on May 15. (Contributed)
RCMP issue warning: ‘Imitation firearms need to be dealt with responsibly’

A man brandishing his airsoft rifle in public had his weapon seized by Mounties on Saturday

Abbotsford Regional Hospital. (Black Press Media files)
Canada marks 25,000 COVID-19 deaths since the pandemic began

6 in every 10,000 Canadians died of COVID-19 since March 9, 2020

Staff-Sgt. Svend Nielsen, with the 100 Mile House RCMP. (Melissa Smalley - 100 Mile Free Press)
14-year-old boy killed in serious ATV crash near 100 Mile House

Youth was travelling with a group of peers when the incident occurred last Friday

Relief is coming for B.C.’s struggling tourism sector. (NEWS file photo)
B.C. officials set to announce more support for tourism sector hit hard by pandemic

Non-essential travel is restricted between three regional zones in B.C. until at least May 24

This image released by Universal Pictures shows Nathalie Emmanuel, left, and Vin Diesel in a scene from “F9.” (Giles Keyte/Universal Pictures via AP)
The blockbuster movie is making a comeback this summer

Excitement in the industry is growing again for a return to a big-screen normal

Grand Forks Fire/Rescue’s Dave Paulett hoses down a section of a wooden retaining wall which caught fire Monday, May 17. Photo: Laurie Tritschler
Fire starts in Grand Forks backyard after by oily rags left in sun

Flames put out before reaching home on 800-block of 72nd Avenue

Sicamous RCMP Sgt. Murray McNeil and Cpl. Wade Fisher present seven-year-old Cody Krabbendam of Ranchero with an award for bravery on July 22, 2020. (Contributed)
7-year old Shuswap boy receives medal of bravery for rescuing child at beach

Last summer Cody Krabbendam jumped into the lake to save another boy from drowning

B.C. Health Minister Adrian Dix and provincial health officer Dr. Bonnie Henry update the province’s COVID-19 vaccine program, May 10, 2021. (B.C. government)
B.C.’s COVID-19 infection rate stays below 500 a day over weekend

14 more deaths, down to 350 in hospital as of Monday

Most Read